...

Physics of the Eye

by taratuta

on
Category: Documents
205

views

Report

Comments

Transcript

Physics of the Eye
930
CHAPTER 26 | VISION AND OPTICAL INSTRUMENTS
Seeing faces and objects we love and cherish is a delight—one’s favorite teddy bear, a picture on the wall, or the sun rising over the mountains.
Intricate images help us understand nature and are invaluable for developing techniques and technologies in order to improve the quality of life. The
image of a red blood cell that almost fills the cross-sectional area of a tiny capillary makes us wonder how blood makes it through and not get stuck.
We are able to see bacteria and viruses and understand their structure. It is the knowledge of physics that provides fundamental understanding and
models required to develop new techniques and instruments. Therefore, physics is called an enabling science—a science that enables development
and advancement in other areas. It is through optics and imaging that physics enables advancement in major areas of biosciences. This chapter
illustrates the enabling nature of physics through an understanding of how a human eye is able to see and how we are able to use optical instruments
to see beyond what is possible with the naked eye. It is convenient to categorize these instruments on the basis of geometric optics (see Geometric
Optics) and wave optics (see Wave Optics).
26.1 Physics of the Eye
The eye is perhaps the most interesting of all optical instruments. The eye is remarkable in how it forms images and in the richness of detail and color
it can detect. However, our eyes commonly need some correction, to reach what is called “normal” vision, but should be called ideal rather than
normal. Image formation by our eyes and common vision correction are easy to analyze with the optics discussed in Geometric Optics.
Figure 26.2 shows the basic anatomy of the eye. The cornea and lens form a system that, to a good approximation, acts as a single thin lens. For
clear vision, a real image must be projected onto the light-sensitive retina, which lies at a fixed distance from the lens. The lens of the eye adjusts its
power to produce an image on the retina for objects at different distances. The center of the image falls on the fovea, which has the greatest density
of light receptors and the greatest acuity (sharpness) in the visual field. The variable opening (or pupil) of the eye along with chemical adaptation
10
times greater (without damage). This is an incredible range of detection.
allows the eye to detect light intensities from the lowest observable to 10
Our eyes perform a vast number of functions, such as sense direction, movement, sophisticated colors, and distance. Processing of visual nerve
impulses begins with interconnections in the retina and continues in the brain. The optic nerve conveys signals received by the eye to the brain.
Figure 26.2 The cornea and lens of an eye act together to form a real image on the light-sensing retina, which has its densest concentration of receptors in the fovea and a
blind spot over the optic nerve. The power of the lens of an eye is adjustable to provide an image on the retina for varying object distances. Layers of tissues with varying
indices of refraction in the lens are shown here. However, they have been omitted from other pictures for clarity.
Refractive indices are crucial to image formation using lenses. Table 26.1 shows refractive indices relevant to the eye. The biggest change in the
refractive index, and bending of rays, occurs at the cornea rather than the lens. The ray diagram in Figure 26.3 shows image formation by the cornea
and lens of the eye. The rays bend according to the refractive indices provided in Table 26.1. The cornea provides about two-thirds of the power of
the eye, owing to the fact that speed of light changes considerably while traveling from air into cornea. The lens provides the remaining power
needed to produce an image on the retina. The cornea and lens can be treated as a single thin lens, even though the light rays pass through several
layers of material (such as cornea, aqueous humor, several layers in the lens, and vitreous humor), changing direction at each interface. The image
formed is much like the one produced by a single convex lens. This is a case 1 image. Images formed in the eye are inverted but the brain inverts
them once more to make them seem upright.
Table 26.1 Refractive Indices Relevant to the Eye
Material
Index of Refraction
Water
1.33
Air
1.0
Cornea
1.38
Aqueous humor 1.34
Lens
1.41 average (varies throughout the lens, greatest in center)
Vitreous humor 1.34
This content is available for free at http://cnx.org/content/col11406/1.7
CHAPTER 26 | VISION AND OPTICAL INSTRUMENTS
Figure 26.3 An image is formed on the retina with light rays converging most at the cornea and upon entering and exiting the lens. Rays from the top and bottom of the object
are traced and produce an inverted real image on the retina. The distance to the object is drawn smaller than scale.
As noted, the image must fall precisely on the retina to produce clear vision — that is, the image distance
Because the lens-to-retina distance does not change, the image distance
d i must equal the lens-to-retina distance.
d i must be the same for objects at all distances. The eye manages this by
varying the power (and focal length) of the lens to accommodate for objects at various distances. The process of adjusting the eye’s focal length is
called accommodation. A person with normal (ideal) vision can see objects clearly at distances ranging from 25 cm to essentially infinity. However,
although the near point (the shortest distance at which a sharp focus can be obtained) increases with age (becoming meters for some older people),
we will consider it to be 25 cm in our treatment here.
Figure 26.4 shows the accommodation of the eye for distant and near vision. Since light rays from a nearby object can diverge and still enter the eye,
the lens must be more converging (more powerful) for close vision than for distant vision. To be more converging, the lens is made thicker by the
action of the ciliary muscle surrounding it. The eye is most relaxed when viewing distant objects, one reason that microscopes and telescopes are
designed to produce distant images. Vision of very distant objects is called totally relaxed, while close vision is termed accommodated, with the
closest vision being fully accommodated.
Figure 26.4 Relaxed and accommodated vision for distant and close objects. (a) Light rays from the same point on a distant object must be nearly parallel while entering the
eye and more easily converge to produce an image on the retina. (b) Light rays from a nearby object can diverge more and still enter the eye. A more powerful lens is needed
to converge them on the retina than if they were parallel.
931
932
CHAPTER 26 | VISION AND OPTICAL INSTRUMENTS
We will use the thin lens equations to examine image formation by the eye quantitatively. First, note the power of a lens is given as
p = 1 / f , so we
rewrite the thin lens equations as
P= 1 + 1
do di
(26.1)
hi
d
= − i = m.
ho
do
(26.2)
and
We understand that
d i must equal the lens-to-retina distance to obtain clear vision, and that normal vision is possible for objects at distances
d o = 25 cm to infinity.
Take-Home Experiment: The Pupil
Look at the central transparent area of someone’s eye, the pupil, in normal room light. Estimate the diameter of the pupil. Now turn off the lights
and darken the room. After a few minutes turn on the lights and promptly estimate the diameter of the pupil. What happens to the pupil as the
eye adjusts to the room light? Explain your observations.
The eye can detect an impressive amount of detail, considering how small the image is on the retina. To get some idea of how small the image can
be, consider the following example.
Example 26.1 Size of Image on Retina
What is the size of the image on the retina of a
retina distance to be 2.00 cm.
1.20×10 −2 cm diameter human hair, held at arm’s length (60.0 cm) away? Take the lens-to-
Strategy
We want to find the height of the image
away, so that
h i , given the height of the object is h o = 1.20×10 −2 cm. We also know that the object is 60.0 cm
d o = 60.0 cm . For clear vision, the image distance must equal the lens-to-retina distance, and so d i = 2.00 cm . The equation
hi
d
= − i = m can be used to find h i with the known information.
ho
do
Solution
The only unknown variable in the equation
hi
d
= − i = m is h i :
ho
do
hi
d
= − i.
ho
do
Rearranging to isolate
(26.3)
h i yields
h i = −h o ⋅
di
.
do
(26.4)
Substituting the known values gives
h i = −(1.20×10 −2 cm) 2.00 cm
60.0 cm
−4
= −4.00×10 cm.
(26.5)
Discussion
This truly small image is not the smallest discernible—that is, the limit to visual acuity is even smaller than this. Limitations on visual acuity have
to do with the wave properties of light and will be discussed in the next chapter. Some limitation is also due to the inherent anatomy of the eye
and processing that occurs in our brain.
Example 26.2 Power Range of the Eye
Calculate the power of the eye when viewing objects at the greatest and smallest distances possible with normal vision, assuming a lens-toretina distance of 2.00 cm (a typical value).
Strategy
This content is available for free at http://cnx.org/content/col11406/1.7
Fly UP