...

Samsung T769 Galaxy S Blaze. Sound Settings

by taratuta

on
Category: Documents
4

views

Report

Comments

Transcript

Samsung T769 Galaxy S Blaze. Sound Settings
Tap within the number field, tap
to delete the
3.
current number, and enter a new number. Tap OK to store
the new number.
1.
From this menu you can control the sounds on the phone as well
as configure the display settings.
Press
➔
current mode displays).
Setup Phone Vibration
Sound Settings
䊳
Tap Silent mode to activate or deactivate this mode (the
and then tap
(Settings) ➔
Press
➔
and then tap
(Settings) ➔
Sound.
2.
Tap Vibration and select a vibration mode. Choose from:
Always, Never, Only in Silent mode, or Only when not in
Sound.
Silent mode.
The following options display:
Silent mode
Silent mode is convenient when you wish to stop the phone from
making noise, in a theater for example. In Silent Mode the
speaker is muted and the phone only vibrates to notify you of
incoming calls, or other functions that normally have a defined
tone or sound as an alert.
1.
Press
➔
and then tap
Note: The Phone vibrate setting is independent of other call sounds settings.
For example, if you have Silent mode enabled along with Phone
vibrate, your phone won’t play a ringtone, but will vibrate for an
incoming call.
Note: Use both the Silent mode and enable the Only when not in Silent mode
option to guarantee no vibrations or sounds from your phone.
(Settings) ➔
Sound.
2.
Tap Silent mode.
– or –
From the Home screen, press and hold
until
Phone options displays.
Changing Your Settings
223
Adjusting the Volume Settings
Setup the Voice Call Ringtone
The Volume menu now provides access to various volume
settings within one on-screen popup menu.
1.
Press
➔
and then tap
(Settings) ➔ Sound
➔ Volume.
2.
• Incoming call, Media, System, or Notification.
3. Tap OK to assign the volume levels.
Adjusting the Vibration Intensity Settings
This menu allows you to adjust vibration settings for various
categories within one on-screen popup menu.
Press
➔
and then tap
(Settings) ➔ Sound
➔ Vibration intensity.
2.
Touch and drag the on-screen slider to assign the levels for
any of the following vibration levels.
3.
• Incoming call, Notification, or Haptic feedback.
Tap OK to assign the new levels.
Press
➔
and then tap
(Settings) ➔
Sound.
2.
Tap Phone ringtone.
3.
Tap a ringtone from the available list. The ringtone briefly
Touch and drag the on-screen slider to assign the volume
settings for any of the following volume levels.
1.
1.
plays when selected.
4.
Tap OK to assign a ringer.
Setting a Notification Ringtone
1.
Press
➔
and then tap
(Settings) ➔ Sound
➔ Notification ringtone.
2.
Tap one of the ringtones and tap OK.
Audible Tone Settings
The Audible touch tones and Audible selection options are used
when you use the dialing pad or making a screen selection. Each
time you press a key or make a selection the selected tone
sounds.
1.
Press
➔
and then tap
(Settings) ➔
Sound.
2.
Tap Audible touch tones or Audible selection. A check mark
displayed next to these features indicates active status.
224
Fly UP